Description
Therapeutic principle
The sixth generation knight laser speckle removal is a speckle removal methodbased on the theory of selective photothermal effect, which uses its powerfulinstantaneous power to vaporize and smash its spots directly, and then expel them fromthe body through lymphatic tissues without affecting the surrounding normal tissues.Generally speaking,it will not rebound, but laser speckle removal has a certainselectivity.
Six generations of knights can produce lasers of different wavelengths, mainlyaiming at black and coffee pigments and color spots. They combine light and pigmentsto decompose them. When the pigments are gradually absorbed by the body, the colorof the color spots will become lighter, The whole operation only takes tens of minutes,.without bleeding or surgery, and the freckle removal effect can be seen after theoperation. lt is the most effective freckle removal method at present.
Six generation knight laser freckle removal, when the pigment is graduallyabsorbed by the body, the skin color will also become pale. Usually, such as freckles.Zygomatic nevus, liver spots, Taitian mother spots, senile spots and sunburn spots canbe treated with laser, Tattoo and tattoo can also be eliminated by laser.
In the figure, the laser outputsurface is the focus of the laser, andthe diameter of the focus spot is1~7mm. When the laser convergenceequidistant point contacts the skinthe diameter of the convergence focusspot is imm. When the laserconvergence equidistant point doesnot contact the patient’s partadjusting the distance between theaser convergence equidistant pointand the patient’s skin is to adjust thediameter of the convergence focusspot. Adjusting the distance betweenthe laser convergence equidistantpoint and the patient’s skin is 03mm,and the corresponding convergencefocus spot diameter is 1~7mm. Afterthe distance is far, the treatmenteffect cannot be achieved,
The laser emission inlet shall beinserted into the laser guide arm base,and then the base shall be locked witha locking device.
Technical parameters
|
Ambient temperature |
10~30 °C; |
|
Relative humidity |
≤ 75% |
|
Atmospheric pressure |
860~1060hpa |
|
Power supply |
AC220V+10%,50Hz± 2% |
|
Cooling water |
eionized water or purifed distilled water, with the minimumstandard |
|
Dimension table including lignt guide arm,unit:cm |
length 112 width 63 height 121 |
|
Gross weight |
95kg |
|
Power |
single circuit 1000w, double circuit 2000w |
|
Overcurrent protector model |
220V/110V |
|
Working laser wavelength |
1064nm;785nm; 532n |
|
Laser output frequency |
1-10hz |
|
Spot diameter |
2-10mm adjustabl |
|
Maximum output energy of single pulse |
1064nm(1064:0.1~2.0J);785nm(0.1~2.0J); |
|
Eye hazard distance |
NOHD is 100m, which is harmful to eyes in the sealedoperating |
|
Cooling mode |
built-in closed cycle water cooling |
